– A 24-port, Layer 3 switch with 2.5 GbE PoE+ output.
Features
– (12) 2.5 GbE, (12) GbE; all PoE+ ports
– (2) 10G SFP+ ports
– 400W total PoE availability
– DC power backup-ready
– Layer 3 switching
Specifications
Mechanical
– Dimensions: 442 x 325 x 44 mm (17.4 x 12.8 x 1.7″)
– Weight: Without mounting brackets: 5.1 kg (11.3 lb)
– With mounting brackets: 5.2 kg (11.5 lb)
– Enclosure material: SGCC steel
Hardware
– Management interface: Ethernet In-Band
– Networking interface
• (12) GbE RJ45 ports
• (12) 2.5 GbE RJ45 ports
• (2) 10G SFP+ ports
– PoE interface: (24) PoE/PoE+ (Pins 1, 2+; 3, 6-)
– Total non-blocking throughput: 62 Gbps
– Switching capacity: 124 Gbps
– Forwarding rate: 92.25 Mpps
– Power method
• (1) Universal input, 100—240V AC, 8.5A Max., 50/60 Hz
• (1) USP-RPS DC input: 52V DC, 7.7A; 11.5V DC, 8.7A
– Power supply: AC/DC, internal, 550W
– Supported voltage range: 100—240V AC
– Max. power consumption: 60W (Excluding PoE output)
– Total available PoE: 400W
– Max. PoE+ wattage per port by PSE. 34.2W
– Voltage range PoE mode:
• PoE: 44— 57V
• PoE+: 50—57V
– Services: SMB Layer 3 PoE GbE switch
– ESD/EMP protection: Air: ± 16kV, contact: ± 12kV
– LCM display: (1) 1.3″ color touchscreen
– Button: Factory reset
– Ambient operating temperature: -5 to 40° C (23 to 104° F)
– Ambient operating humidity: 10 to 95% noncondensing
– Certifications: CE, FCC, IC
Switching Features
Layer 2 features
– IGMP snooping
– STP / RSTP with priorities and port-level disable
– Port isolation
– Storm control
– Voice VLAN
– Port mirroring
– LACP port aggregation
– Multicast / broadcast rate limiting
– MAC address blocking
– Flow control
– 802.1X control
– Jumbo frames
– Proprietary loop protection
– DHCP snooping / guarding
– Egress rate limit
– LLDP-MED
– Port restricted by MAC
– Device isolation with ACLs
Layer 3 features
– DHCP for locally-managed networks
– DHCP relay
– Inter-VLAN routing between networks on same switch
– Static routing between local networks
– Network isolation with ACLs
LEDs
– System: Status
– Ethernet: Link/activity
– SFP+: Link/activity
Application Requirements
– UniFi Network: Version 5.14.12 and later
Recenzije
Još nema recenzija.