SUPPORTED OS
– Windows 7/8/8.1/10/Server 2008/Server 2008 R2/Server 2012/Server 2016 (x86 & x64)
– Linux (support x86, x64 & ARM architecture)
* Ubuntu 12.04/14.04/16.04/17.04/17.10 (x86 & x64)
* CentOS 6.5/7 (x86 & x64)
* Fedora 25/26/27 (x86 & x64)
* Red hat 6.5 and above (x86 & x64)
* Other Linux OS with kernel version 2.6.35 and above
– Mac:
* OS X 10.9/10.10/10.11
* macOS 10.12/10.13
– Chrome OS
RECOMMENDED OS (TESTED)
– Windows 7 Ultimate/8.1 Enterprise/10 Enterprise/Server 2008 R2 DataCenter/Server 2012 R2 DataCenter/Server 2016 R2 DataCenter (x86 & x64)
– Linux:
* Ubuntu 12.04/14.04/16.04 (x86 & x64)
* Ubuntu 17.04/17.10 (x64)
* CentOS 6.5/7.2 (x86 & x64)
* Fedora 25/26 (x64)
* Red hat 6.5 (x86 & x64)
– Mac:
* OS X 10.9.5/10.10/10.11.2/10.11.3/10.11.4
* macOS 10.12/10.13.2/10.13.3
SUPPORTED APIs
– Windows:
* DirectShow
* Wave API/DirectSound/WASAPI
– Linux:
* V4L2
* ALSA
– OS X/macOS:
* QuickTime
* AV Foundation
SUPPORTED SOFTWARE
– VLC
– VirtualDub
– OBS
– XSplit
– vMix
– VidBlaster
– Wirecast
– Microsoft Media Encoder
– Adobe Flash Media Encoder
– Any other DirectShow, V4L2, QuickTime, AV Foundation based encoding or streaming software
INPUT INTERFACES
– DVI-I
* DVI 1.0
* HDMI 1.4a (via breakout cable)
* VGA (via DVI-to-VGA convertor)
* Component (via breakout cable)
– DB9
* YC (S-Video)
* Composite video
* Analog audio (L+R)
* Component video
– BNC
* SD/HD/3G SDI
HOST INTERFACE
– USB 3.0
* compatible with USB 2.0
* compatible with USB 3.1 Gen 1
INPUT FEATURES
– Auto scan of video input sources when there is no signal input to the currently selected input source
– Manual selection of video input source
– Auto selection of linked (embedded) audio input source when the video input source changes
– Manual selection of audio input source
– Support for input video resolutions up to 2048×2160
VGA & COMPONENT SPECIFIC FEATURES
– 12-bit ADC
– Support for RGB & YCbCr (YUV) color formats
– Support for “Separated sync”, “Composite sync”, “Sync-on-green” (SOG), “Sync-on-luminance” (SOY)
– Support for DMT, CEA, CVT, GTF video timings
– Input signals up to 165MHz pixel rate are digitized with 1:1 sampling
– Input signals over 165MHz pixel rate can be digitized with horizontal sub-sampling (resulting in some image quality loss – NOT recommended)
– Auto detection of RGB & YCbCr color formats
– Auto or manual sampling phase adjustment
– Auto horizontal alignment
– Support for customized video timings
– Support for customized video resolutions for CVT/GTF timings
HDMI SPECIFIC FEATURES
– 225MHz HDMI receiver
– Adaptive HDMI equalizer support for cables lengths up to 30M
– Support for customized EDID
– Support for extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames
– Full colorimetry support
– Support for 8/10/12-bit color depths
– Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
– Support for up to 2-channel IEC60958 audio streams
– Support for extraction of audio formation information & channel status data
– Support for extraction of video timing information
– Support for extraction of 3D format information
– Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode
SDI SPECIFIC FEATURES
– Integrated cable equalizer supporting cable lengths up to 230M for HD-SDI signals
– Support for SD/HD/3Ga/3Gb/3Ga-DL/3Gb-DS standards
– Support for 2K (2048×1080) mode
– Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
– Support for 10/12-bit color depth
– Support for extraction of SMPTE 352 payload identifier
– Support for up to 8 (mono) audio channels at 48KHz
– Support for extraction of audio formation information & channel status data
– Limited support of 3Gb-DS: only the first stream can be captured
– Limited support for capture of the first link of dual link interfaces:
* YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60
* YCbCr 4:4:4 10-bit: captured as 4:2:2
* RGB 4:4:4: R/B sub-sampled
YC & COMPOSITE SPECIFIC FEATURES
– 12-bit ADC
– Support for NTSC, PAL, SECAM standards
– Auto detection of the standard of input signal
VIDEO CAPTURE FORMAT
– Support for capture resolutions up to 2048×2160
– Support for capture frame rates up to 120fps (Actual capture frame rate can be limited by the USB bandwidth and internal working frequency – Typical capture frame rates on the Intel USB3.0 controller are as follows)
* 1920×1080 YUY2 (up to 75fps)
* 1920×1080 RGB24 (up to 60fps)
– Support for 4:2:2 8-bit capture format: YUY2, UYVY
– Support for 4:4:4 8-bit capture format: RGB24, RGB32
– The default capture format is YUY2. More capture formats can be set using USB Capture Utility
VIDEO PROCESSING FEATURES
– Video processing pipelines with 160 Mpixels/s processing bandwidth
– Video cropping
– Video scaling
– Video de-interlacing
* Weave
* Blend top & bottom field
* Top field only
* Bottom field only
– Video aspect ratio conversion
* Auto or manual selection of input aspect ratio
* Auto or manual selection of capture aspect ratio
* Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)
– Video color format conversion
* Auto or manual selection of input color format & quantization range
* Auto or manual selection of capture color format, quantization range & saturation range
* Support for RGB, YCbCr 601, YCbCr 709 color formats
* Support for Limited or Full quantization range
* Support for Limited, Full & ‘Extended gamut’ saturation range
– Video frame rate conversion
– Vertical flip and mirror
MULTIPLE DEVICES ON ONE COMPUTER
– Support for connecting multiple USB devices to one system
SDK
– The USB Capture SDK provide functions including signal status extraction, capture configuration, etc.
– Support for setting the device serial number as the device name shown in the system using USB Capture Utility
FIRMWARE UPGRADE
– Multiple devices in one system can be upgraded simultaneously
LED INDICATOR
– Status LEDs indicate the working state of each channel:
* Pulsing slowly: idle
* On: input signal locked
* Off: input signal unlocked
* Double blinks: memory failed or FPGA configuration failed
FORM FACTOR
– 98(L) × 98(W) × 25(H) mm
ACCESSORIES
– USB 3.0 cable
– DVI to VGA connector
– DVI-I to HDMI + Component breakout
– DB9 to YC + Composite + Analog Audio + Component breakout
POWER CONSUMPTION
– 5V max current: 1 A
– max power consumption: 5 W
WORKING ENVIRONMENT
– Operating temperature: 0C to 45 deg C
– Storage temperature: -20C to 70 deg C
– Relative Humidity: 5% to 90% non-condensing
Recenzije
Još nema recenzija.