Magewell Pro Convert SDI 4K Plus, standalone box for converting one-channel 6G SDI into NDI stream, loop through (64030 (EU))

– Convert one channel of SD/3G/2K/6G-SDI signal with embedded audio to NDI stream
– Loop-through one channel of SD/3G/2K/6G-SDI signal with embedded audio

SUPPORTED WEB BROWSER
– Microsoft Internet Explorer 11
– Microsoft Edge
– Mozilla Firefox version 61 and above
– Google Chrome version 49 and above
– Apple Safari 11.1 and above
– Opera 55.0.2994.44 and above

SUPPORTED SOFTWARE
– OBS
– XSplit
– vMix
– VidBlasterX
– Wirecast
– streamstar SW
– mimoLive
– Any other NewTek NDI-enabled encoding or streaming software

INPUT INTERFACES
– BNC
* SD/HD/3G/6G SDI

LOOP-THROUGH INTERFACE
– BNC
* SD/HD/3G/6G SDI

STORAGE INTERFACE
– SD Card (functions to be developed)

PTZ + TALLY CONTROL
– Mini-DIN–8 jack

SCREW MOUNTING HOLE
– 1/4-20 mounting hole

NETWORK INTERFACES
– 10/100/1000Mbps Ethernet
– IEEE 802.3af PoE

USB INTERFACE
– USB2.0 Type B
– 5V/2.1A power supply
– USB RNDIS/ECM

INPUT FEATURE
-Support for up to 4096×2160 30fps input resolution

SDI SPECIFIC FEATURES
– Integrated cable equalizer supporting cable lengths up to 150M for 3G-SDI signals
– Support for SD/HD/3Ga/3Gb/3Ga-DL/3Gb-DS/6G (SMPTE 2081) standards
– Support for 2K (2048×1080) & 4K (4096×2160) mode
– Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
– Support for 10/12-bit color depth
– Support for extraction of SMPTE 352 payload identifier
– Support for up to 16 (mono) audio channels
– Support for extraction of audio formation information & channel status data
– Limited support of 3Gb-DS: only the first stream can be captured
– Limited support for capture of the first link of dual link interfaces:
* YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60
* YCbCr 4:4:4 10-bit: captured as 4:2:2
* RGB 4:4:4: R/B sub-sampled

NDI OUTPUT FORMAT
– Support for 4:2:2 8-bit output
– Support for up to 4096×2160 60fps output resolution
– Support for NDI 3.x

VIDEO PROCESSING FEATURES
– Support for capture resolutions up to 4096×2160
– Video brightness, contrast, saturation, hue adjustment
– Video de-interlacing
* Top field only
* Bottom field only
– Video aspect ratio conversion
* Auto or manual selection of output aspect ratio
– Video color format conversion
* Auto or manual selection of input color format & quantization range
* Auto or manual selection of output color format, quantization range & saturation range
* Support for RGB, YUV BT.601, YUV BT.709, YUV BT.2020 input color formats
* Support for YUV BT.601, YUV BT.709, YUV BT.2020 output color formats
* Support for Limited or Full quantization range
* Support for Limited, Full & ‘Extended gamut’ saturation range
– Video frame rate conversion
– Video mirror flip

NDI SOURCE NAME
– Support for setting the device name shown in the system using Web UI
* By default, the device name is “Pro Convert”
– Support for setting the source name shown in the system using Web UI
* By default, the source name is “board-index + serial number”
– Support for setting board-index, from 0 to F, through the on-board rotary switch

FIRMWARE UPGRADE
– Support for manual update using Web UI

LED INDICATOR
– Status LEDs indicate the working state of the device:
* Power supply: on/off
* Tally: preview/program
* Input signal: locked/unlocked
* Loopthrough signal: loopthrough connected and signal detected/undetected

FORM FACTOR
– 117.5(L) × 66.7(W) × 23.4(H) mm

ACCESSORIES
– USB 2.0 A to B Cable
– 5V/2.1A power adaptor
– Mini-DIN–8 (PTZ + TALLY) to RS232 (PTZ) + Mini-DIN–8 (TALLY)
– L-bracket
– LED matrix panel (optional)

POWER CONSUMPTION
– 5V max current: 1.5A
– Max power consumption: 7W

WORKING ENVIRONMENT
– Operating temperature: 0C to 45 deg C
– Storage temperature: -20C to 70 deg C
– Relative Humidity: 5% to 90% non-condensing