Magewell Pro Convert HDMI Plus, standalone box for converting one-channel HDMI into NDI stream, loop though, max 4k60 4:2:0 as input (64020 (EU))

SUPPORTED WEB BROWSER (TESTED)
– Microsoft Internet Explorer 11
– Microsoft Edge
– Mozilla Firefox version 61 and above
– Google Chrome version 49 and above
– Apple Safari 11.1 and above
– Opera 55.0.2994.44 and above

SUPPORTED SOFTWARE (TESTED)
– OBS
– XSplit
– vMix
– VidBlasterX
– Wirecast
– streamstar SW
– mimoLive
– Any other NewTek NDI-enabled encoding or streaming software

INPUT INTERFACES
– HDMI
* DVI-D 1.0
* HDMI 1.4

LOOP-THROUGH INTERFACE
– HDMI
* DVI-D 1.0
* HDMI 1.4

STORAGE INTERFACE
– SD Card (functions to be developed)

PTZ + TALLY CONTROL
– Mini-DIN–8 jack

SCREW MOUNTING HOLE
– 1/4-20 mounting hole

NETWORK INTERFACES
– 10/100/1000Mbps Ethernet
– IEEE 802.3af PoE

USB INTERFACE
– USB2.0 Type B
– 5V/2.1A power supply
– USB RNDIS/ECM

INPUT FEATURE
– Support for input video resolutions up to 4096×2160

HDMI SPECIFIC FEATURES
– 297MHz HDMI receiver
– Adaptive HDMI equalizer
– Support for customized EDID
– Support for extraction of AVI/Audio InfoFrames
– Full colorimetry support
– Support for up to 4096×2160 4:4:4/4:2:2 30fps or 4096×2160 4:2:0 60fps input signals
– Support for 8 channel IEC60958 audio streams
– Support for extraction of audio formation information & channel status data
– Support for extraction of video timing information
– Support for extraction of 3D format information
– Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode

NDI OUTPUT FORMAT
– Support for 4:2:2 8-bit output
– Support for up to 2048×2160 120fps
– Support for NDI 3.x

VIDEO PROCESSING FEATURES
– Video processing pipelines with 160 Mpixels/s
– Video brightness, contrast, saturation, hue adjustment
– Video de-interlacing
* Top field only
* Bottom field only
– Video aspect ratio conversion
* Auto or manual selection of output aspect ratio
– Video color format conversion
* Auto or manual selection of input color format & quantization range
* Auto or manual selection of output color format, quantization range & saturation range
* Support for RGB, YUV BT.601, YUV BT.709, YUV BT.2020 input color formats
* Support for YUV BT.601, YUV BT.709, YUV BT.2020 output color formats
* Support for Limited or Full quantization range
* Support for Limited, Full & ‘Extended gamut’ saturation range
– Video frame rate conversion
– Video mirror flip

NDI SOURCE NAME
– Support for setting the device name shown in the system using Web UI
* By default, the device name is “Pro Convert”
– Support for setting the source name shown in the system using Web UI
* By default, the source name is “board-index + serial number”
– Support for setting board-index, from 0 to F, through on-board rotary switch

FIRMWARE UPGRADE
– Support for manual update using Web UI

LED INDICATOR
– Status LEDs indicate:
* the state of power supply: on/off
* Tally: preview/program
* the state of input signal: locked/unlocked
* the state of loopthrough signal: loopthrough connected and signal detected/undetected

FORM FACTOR
– 117.5(L) × 66.7(W) × 23.4(H) mm

ACCESSORIES
– USB 2.0 A to B Cable
– 5V/2.1A power adaptor
– Mini-DIN–8 (PTZ + TALLY) to RS232 (PTZ) + Mini-DIN–8 (TALLY)
– L-bracket
– LED matrix panel (optional)

POWER CONSUMPTION
– 5V max current: 1.5A
– Max power consumption: 8W

WORKINH ENVIRONMENT
-Operating temperature: 0C to 45 deg C
– Storage temperature: -20C to 70 deg C
– Relative Humidity: 5% to 90% non-condensing