SUPPORTED OS
– Windows 7/8/8.1/10/Server 2008/Server 2008 R2/Server 2012/Server 2016 (x86 & x64)
– Linux (support x86, x64 & ARM architecture)
* Ubuntu 12.04/14.04/16.04/17.04/17.10 (x86 & x64)
* CentOS 6.5/7 (x86 & x64)
* Fedora 25/26/27 (x86 & x64)
* Red hat 6.5 and above (x86 & x64)
* Other Linux OS with kernel version 2.6.35 and above
– Mac
* OS X 10.9/10.10/10.11
* macOS 10.12/10.13
RECOMMENDED OS (TESTED)
– Windows 7 Ultimate/8.1 Enterprise/10 Enterprise/Server 2008 R2 DataCenter/Server 2012 R2 DataCenter/Server 2016 R2 DataCenter (x86 & x64)
– Linux
* Ubuntu 12.04/14.04/16.04 (x86 & x64)
* Ubuntu 17.04/17.10 (x64)
* CentOS 6.5/7.2 (x86 & x64)
* Fedora 25/26 (x64)
* Red hat 6.5 (x86 & x64)
– Mac
* OS X 10.9.5/10.10/10.11.2/10.11.3/10.11.4
* macOS 10.12/10.13.2/10.13.3
SUPPORTED APIs
– Windows
* DirectShow
* DirectKS
* Wave API/DirectSound/WASAPI
– Linux
* V4L2
* ALSA
SUPPORTED SOFTWARE
– VLC
– VirtualDub
– OBS
– XSplit
– vMix
– VidBlaster
– Wirecast
– Microsoft Media Encoder
– Adobe Flash Media Encoder
– Any other DirectShow/V4L2 encoding/streaming software
INPUT INTERFACES
– 2× HDMI
* HDMI 2.0
HOST INTERFACE
– PCIe Gen2 x8
LOOP-THROUGH INTEFACE
– 2× HDMI
* HDMI 2.0
INPUT FEATURES
– Support for input video resolutions up to 4096×2160 pixels
HDMI SPECIFIC FEATIRES
– 594MHz HDMI receiver
– Adaptive HDMI equalizer
– Support for customized EDID
– Support for extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut/HDR/VBI InfoFrames
– Full colorimetry support
– Support for 8/10/12-bit color depths
– Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
– Support for up to 8-channel IEC60958/IEC61937 audio streams
– Support for extraction of audio formation information & channel status data
– Support for extraction of video timing information
– Support for extraction of 3D format information
– Support for extraction of Sony/Canon DSLR time code
– Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode.
– Support for HDR10
VIDEO CAPTURE FORMATS
– Support for capture image resolutions up to 4096×2160 pixels
– Support for capture frame rates up to 144fps (Actual capture frame rate can be limited by PCIe bandwidth & image resolution)
– Support for 4:2:0 8-bit capture formats: NV12, I420, YV12
– Support for 4:2:2 8-bit capture formats: YUY2, YUYV, UYVY
– Support for 4:4:4 8-bit capture formats: V308, IYU2, V408, BGR24, BGR32
– Support for 4:4:4 10-bit capture formats: V410, Y410
– More capture formats are supported via Magewell Capture SDK for DirectKS
VIDEO PROCESSING FEATURES
– Two video processing pipelines with ~720Mpixels/s processing bandwidth for each one
– Full 10-bit video processing
– Video cropping
– Video scaling
– Video de-interlacing
* Weave
* Blend top & bottom field
* Top field only
* Bottom field only
– Video aspect ratio conversion
* Auto or manual selection of input aspect ratio
* Auto or manual selection of capture aspect ratio
* Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)
– Video color format conversion
* Auto or manual selection of input color format & quantization range
* Auto or manual selection of capture color format, quantization range & saturation range
* Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
* Support for Limited or Full quantization range
* Support for Limited, Full & ‘Extended gamut’ saturation range
– Video frame rate conversion
– Video OSD composition
* Support for PNG OSD image (up to 4096×2160)
* Support for dynamic loading of RGBA OSD image via SDK
MULTIPLE CARDS PER SYSTEM
– Support for multiple cards plugged to one system
– On-board rotary switch to set card number, with 16 positions from 0 to F
– System hardware device tree will display “01: Pro Capture Dual HDMI 4K+ LT” when rotary switch is set to 1, and so on
– The video and audio device names displayed in your software will include the card number (set by the rotary switch)
MULTIPLE CAPTURE STREAMS
– Unlimited capture streams for any one input channel
– Independent cropping, aspect ratio, color format, resolution, frame rate, de-interlacing and color adjustment settings for each individual stream
ULTRA LOW LATENCY SUPPORT
– Latency of 64 video lines
– Partial notification mode in SDK
TIMESTAMP & A/V SYNCHRONIZATION
– Hardware based 100ns high resolution clock
– Audio frames (192 audio samples) & video frames are stamped with hardware clock
– Hardware clock can be synchronized across cards (via SDK)
VIDEO CAPTURE SG-DMA
– 1600MB/s per channel DMA bandwidth in PCIe 2.x system
– 800MB/s per channel DMA bandwidth in PCIe 1.x system
– Support for auto detection of Intel tiled GPU surface
– Support for DirectGMA for AMD video adapter chipsets
– Support for GPUDirect for Nvidia video adapter chipsets
SDK
– Magewell Capture SDK for DirectShow for easy integration (Windows)
– Magewell Capture SDK for DirectKS for maximum flexibility & performance (Windows)
WINDOWS DRIVER TWEAKS
– All options can be controlled by three levels of registry key: global level, product level and device level
– Video, Audio, Crossbar filter names can be customized via registry keys
FIRMWARE UPGRADE
– Multiple cards in one system can be upgraded simultaneously
– Cards can be upgraded without a system power shutdown (In most cases, even a reboot is not needed)
– Safe upgrade
– If power off or system break down occur when the firmware is being upgraded, it will automatically restore to the initial version
LED INDICATOR
– Status LEDs indicate the working state of each channel:
* Pulsing slowly: idle
* On: input signal locked
* Off: input signal unlocked
* Double blinks: memory failed or FPGA configuration failed
FORM FACTOR
– Normal profile PCIe x8 Add-on Card
– 127.89×102.92 mm (without PCI bracket)
POWER CONSUMPTION
– Max current at 12V: 1.32 A
– Max current at 3.3V: 1.94 A
– Max power consumption: 22 W
WORKING ENVIRONMENT
– Operating temperature: 0C to 40 deg C
– Storage temperature: -2C0 to 70 deg C
– Relative Humidity: 5% to 90% non-condensing
Recenzije
Još nema recenzija.