Specification
GENERAL
– CPU: ARM 180MHz 32Bit
– System Clock: 180MHz
– Flash Memory: 8M Byte
– SDRAM: 32M Byte
– LED: 5
– Watch Dog: Yes
– USB Port: 2
– Environment Port: Yes
– Real Time Clock: Yes
– LCD Display: No
– LAN Interface: 10M/100M UTP
– Ethernet Throughput: 1620K Byte per seconds
– Ethernet Latency: 0.759 milliseconds
POWER
– DC Input Voltage: min. +5.3V, max. +40V
– DC Input Current (Including USB device): max. 8W
SIGNAL
– Receiver Inputs:
* Input Voltage Range: min. -25V, max. +25V
* Input Threshold Low: conditions: TA = +25°, min. +0.6V, typ. 1.2V
* Input Threshold High: conditions: TA = +25°C, typ. +1.5V, max. 2.4V
* Input Hysteresis: typ. 0.3V
* Input Resistance: conditions: TA = +25°C, min. 3k ohm, typ. 5k ohm, max. 7k ohm
– Transmitter Outputs:
* Output Voltage Swing: conditions: All transmitter outputs loaded with 3k ohm to ground, min. +/-5.0V, max. +/-5.4V
* Output Resistance: conditions: TA = +25°C, min. 300, typ, 10M
* Output Short-Circuit Current: typ. +/- 35 mA, max. +/-60 mA
USB Port A
– Output Power: Maximum 500mA
– USB Function: Complies with Universal Serial Bus Specification Rev. 2.0
– Data Transfer: Supports data transfer at Full-speed (12M bit/sec) and Low-speed (1.5M bit/s)
USB Port B
– Output Power: Maximum 500mA
– USB Function: Complies with Universal Serial Bus Specification Rev. 2.0
– Data Transfer: Supports data transfer at Full-speed (12M bit/s) and Low-speed (1.5M bit/sec)
ENVIRONMENT
– Operating Temperature: min. 0°C, max. 60°C
– Storage Temperature: min. -40°C, max. 125°C
– Operating Humidity: conditions: Non-Condensing, min. 10% RH, max. 90% RH
– Storage Humidity: conditions: Non-Condensing, min. 5% RH, max. 95% RH
Recenzije
Još nema recenzija.