– Protect your equipment with an uninterruptible power supply against data loss
– Multistation 1000 has an output capability of 1000 VA
– This device is mainly designed for domestic multimedia or small office applications
– It provides complete surge protection for critical loads, which are connected directly to protected sockets through the UPS
– It has a Line-interactive technology with pseudo-sinusoidal waveform and a short transfer time of 2ms
– Autonomy time during a black-out is about 10min.
– With its compact design, Multistation 1000 is equipped with 3 schuko outlet protected against power outages and with 3 filtered schuko outlet
– It has also a USB interface for communication and a USB CHARGER output to recharge devices such as mobile phone, tablet or similar
SPECIFICATIONS
INPUT
– Input: Single-phase with GND connection
– Voltage: 220Vac / 230Vac / 240Vac
– Voltage range: 161 – 290 Vac
– Connections: 1× IEC
OUTPUT
– Output: Single-phase with GND connection
– Voltage Tolerance (Battery Mode): +/-10%
– Frequency: 50 Hz
– Frequency Tolerance (Battery Mode): +/-1 Hz
– Waveform: Modified sinusoidal
– Connections:
* 3× Schuko (UPS)
* 3× Schuko (By-pass)
BATTERY
– Battery Voltage: 12VDC
– Quantity of battery: 1
– Type: 12V/9AH battery sealed lead-acid, maintenance-free
– Recharge time: 6-8 hours at 90% after deep discharge
VISUAL INDICATORS
– AC Mode: Green LED On
– Battery Mode: Yellow LED flashing
– Failure: Red LED On
ACOUSTIC ALARMS
– Backup Mode: A Beep every 10s
– Low Battery: A Beep every 1s
– Overload: A Beep every 0.5s
– Failure: Continuous beep
USB CHARGER
– Typical: 5.0V / 1.0A Max
SWITCHING TIME
– Typical: 2-6 ms
PROTECTIONS
– Complete: Against discharge, overcharging, overload + input fuse
AMBIENT
– Operating Temperature: 0°C to 40°C
– Noise: < 40dB
MECHANICAL
- Dimensions (W×D×H): 202×290×91 mm
- Weight: 4.2 kg
Accessories included in the package
- Instructions Manual
- Input Cable (IEC)
- RJ45 Cable
Recenzije
Još nema recenzija.